3M Tekk Paint Project Respirator, Medium, P95

List Price:	$34.85
Price:	$23.79 & FREE Shipping on orders over $35. Details
You Save:	$11.06 (32%)

In Stock.

Product Description

Size: Medium

Amazon.com

3M Respirators

As one of the leading designers and manufacturers of respirators in the world, 3M provides products that address the needs of both workplace, regulated applications and do-it-yourself, non-regulated applications. For workplace uses, employees may be exposed to known concentrations of harmful contaminants for part or all of the workday. In these situations, respirators are intended to help protect the wearer by reducing their exposure to airborne contaminants from a level that may be hazardous to one that is considered safe or acceptable according to government established levels. In addition, home users cannot easily determine exposure levels nor do they have ready access to the type of training medical evaluation and fit testing needed to be in compliance with workplace respirator standards. In these situations, respirators are intended to help keep non-harmful dusts and certain particles out of your nose, mouth and lungs and with some filters help eliminate annoying odors only.

About NIOSH Respirators

This respirator is government approved by the National Institute for Occupational Safety and Health (NIOSH) as an N95 class respirator and is designed for workplace, regulated uses and applications. NIOSH certification means the respirator has passed stringent government performance standards including filtration efficiency testing and provides at least 95% filtration efficiency solid and liquid particles that do not contain oil.

Fitting Instructions

1. Place respirator over mouth and nose, then pull harness over the crown of your head

2. Take bottom straps in both hands, place them in back of your neck, and hook them together.

3. Position face-piece low on the bridge of your nose for optimal visibility and best fit.

4. Adjust top straps first, then lower neck straps by pulling on ends. Do not pull too tight. Strap tension can be decreased by pushing out on back side of buckles. Perform a positive pressure seal check.

Positive Pressure Seal Check

1. Place the palm of your hand over the exhalation valve cover and exhale gently. If face-piece bulges slightly and no air leaks are detected between your face and the face-piece, a proper fit has been obtained

2. If air leakage is detected, reposition respirator on your face and/or readjust tension of the elastic straps to eliminate leakage

3. Repeat above steps until a tight seal is obtained

What's in the box

One 3M respirator face-piece, one pair organic cartridges, two pair pre-filters, one pair filter retainers

3M Particulate Respirator 8210V, N95 Respiratory Protection 10 count

List Price: $12.50 Price: $10.13 & FREE Shipping on orders over $35. Details You Save: $2.37 (19%)

In Stock. Product Description    From the Manufacturer The 3M™ 8210V is a disposable N95 particulate respirator featuring the 3M™ Cool Flow™ Valve that helps provide comfortable, reliable worker respiratory protection against certain non-oil based particles. The lightweight, disposable N95 particulate dust respirator is designed to help provide quality, reliable worker respiratory protection. Ideally suited for hot/dusty work settings or long periods of wear. 3M uses a variety of innovative features to help you meet your respiratory protection and comfort needs. The respirator incorporates 3M's proprietary technology with advanced electrostatically charged microfiber filter media. The proprietary 3M™ Cool Flow™ Exhalation Valve reduces heat build-up inside the respirator to help keep the wearer more comfortable. it's adjustable noseclip and cushioning nose foam help provide a custom fit with secure seal and reduces potential for eyewear fogging. These features help promote greater worker acceptance and may help increase wear time. Example applications include emergency or pandemic preparedness planning, stockpiling, etc . Grinding, Sanding, Sweeping, Bagging and other dusty operations. For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.   Product Description 3M personal protective equipment sold through Amazon's Industrial and Scientific Department is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132) and all other applicable health and safety standards, as well as all user instructions, warnings and limitations accompanying each product. It is essential that all product user instructions and government regulations on the use of each product be followed in order for the product to help protect the wearer. Misuse of personal protective equipment may result in injury, sickness, or death. For correct product selection and use, individuals should consult their on-site safety professional or industrial hygienist. For additional product information, visit www.3M.com/PPESafety.

3M 8511 Particulate Sanding N95 Respirator with Valve, 10-Pack

List Price:	$18.99
Price:	$16.93 & FREE Shipping on orders over $35. Details
You Save:	$2.06 (11%)

In Stock.

Product Description

   Amazon.com

3M Respirators

As one of the leading designers and manufacturers of respirators in the world, 3M provides products that address the needs of both workplace, regulated applications, and do-it-yourself/home-owner, non-regulated applications. For workplace uses, employees may be exposed to known concentrations of harmful contaminants for part or all of the workday. In these situations, respirators are intended to help protect the wearer by reducing their exposure to airborne contaminants from a level that may be hazardous to one that is considered safe or acceptable according to government established levels. In addition, home users cannot easily determine exposure levels nor do they have ready access to the type of training medical evaluation and fit testing needed to be in compliance with workplace respirator standards. In these situations, respirators are intended to help keep non-harmful dusts and certain particles out of your nose, mouth and lungs and with some filters help eliminate annoying odors only.

Government-Approved Respirator

This respirator is government approved by the National Institute for Occupational Safety and Health (NIOSH) as an N95 class respirator and is designed for workplace, regulated uses and applications. NIOSH certification means the respirator has passed stringent government performance standards including filtration efficiency testing and provides at least 95% filtration efficiency solid and liquid particles that do not contain oil.

Uses

Use this respirator for particles such as those from grinding, sanding, sweeping, sawing, bagging or processing minerals, coal, iron ore, flour, metal, wood, pollen, and certain other substances. And for liquid or non-oil based particles from sprays that do not also emit oil aerosols or vapors.

Fitting Instructions

• 1. Cup the respirator in your hand, with the nosepiece at your fingertips, allowing the headbands to hang freely below your hand.
• 2. Position the respirator under your chin with the nosepiece up. Pull the top strap over your head resting it high at the top back of your head. Pull the bottom strap over your head and position it around the neck below the ears.
• 3. Place your fingertips from both hands at the top of the metal nosepiece. Using two hands, mold the nose area to the shape of your nose by pushing inward while moving your fingertips down both sides of the nosepiece.
• 4. Perform a User Seal Check prior to each wearing. To check the respirator-to-face seal, place both hands completely over the respirator and inhale sharply. Be careful not to disturb the position of the respirator. A negative pressure should be felt inside the respirator. If air leaks around the nose, readjust the nosepiece. If air leaks at the respirator edges, work the straps back along the sides of your head.